Category: Septic Services

Grease Trap and Grease Interceptor

A Grease Trap or grease interceptor is a box within kitchen drain runs to reduce the amount of fats, oils and grease (FOG) that enters the sewer system. Regular cleaning and inspections are important to ensure that they remain effective. Get professional help from Grease Trap Perth today.

Grease Trap

Passive hydromechanical grease traps work by reducing wastewater flow rate and allowing it to cool, separating it into 3 layers. Food solids sink to the bottom, floating oil and grease rise to the top and separated clear water escapes through an outlet baffle. 

The installation of a grease trap is important to keep fats, oils, and grease (FOG) from entering the sewer system. It prevents costly blockages and clogs, as well as reduces the amount of FOG that enters the sewage system. It is also a requirement for many restaurants and commercial kitchens. Failure to install a grease trap can result in heavy fines and expensive repairs.

Typically, the grease trap is located under the sink in the kitchen. It is important to choose a location that is free of obstructions and easily accessible for maintenance. A plumber can help determine the appropriate size and location for the grease trap. The installer should also check with local regulations to ensure compliance. In addition, the installer should shut off the water supply and excavate the site if necessary.

When a grease trap is not properly maintained, it can lead to the buildup of solids, which can clog the inlet and outlet. This can cause wastewater to back up into the kitchen and the surrounding area. Additionally, it can result in a foul odor, which can affect the operation of the kitchen.

Properly maintaining a grease trap requires regular inspections and pump-outs. These must be performed on a schedule that depends on the volume of waste and the type of cooking used in the establishment. In addition, it is essential to use the correct cleaning products. These should break down the grease and allow it to pass through the trap. It is also advisable to have the trap inspected by a professional to make sure it is working properly.

A clogged grease trap can lead to the dumping of contaminated wastewater into the sewer system. This can damage the pipes and cost thousands of dollars to repair. Moreover, it can lead to the spread of disease and increase the risk of fires in the kitchen. In addition, it can also impact the health of employees and customers. Therefore, it is important to have a grease trap installed and regularly maintained. It is also a good idea to install strainers in the drains and appliances to avoid contaminating the grease trap.

Maintenance

Grease traps need to be cleaned on a regular basis. The frequency depends on the volume of wastewater produced and the size of the grease interceptor. However, a rule of thumb is every two to three weeks. This will prevent solid food waste from entering the sewer system, resulting in clogs and overflows. It will also help to avoid the unpleasant odors that can be caused by FOG.

To clean a grease trap, first remove the lid. You will need to be careful when doing this, as there are gaskets in place that should not be damaged. Use a pry bar to detach the lid, but be sure not to break it off. You can also use a wet/dry vacuum to collect any liquids or solid food waste from the inside of the grease trap. After removing the lid, place it in a safe and watertight container. Next, use a dowel to mark the level of grease and oil present in the trap. This will give you a good indication of how much of the trapped material needs to be removed. Once the trap is empty, you will need to dispose of the FOG according to local regulations.

During cleaning, scrape the walls of the grease interceptor to remove any adhered grease build-up thoroughly. This will prevent further blockages and keep the trap working efficiently. It is important to dispose of the grease correctly, as improper disposal can lead to environmental penalties.

Another important part of maintaining a grease trap is to educate staff on proper waste disposal practices. This will help to prevent solid food waste from getting into the grease trap, and it will also prevent waste from being poured down the drains. This can lead to sewer blockages and overflows, which spill raw sewage onto streets and sidewalks and into storm drains that flow into the Bay.

To prevent the need to regularly clean a grease trap, it is essential to use a biodegradable and environmentally friendly fats, oils and grease (FOG) treatment fluid. This solution contains non-pathogenic bacteria and nutrients that break down FOG, helping to prevent its accumulation in internal piping systems.

Cleaning

When it comes to commercial kitchens, grease traps are important for snagging fats, oils, and grease (FOG) before they can make their way into the sewer lines. FOG-clogged sewer lines can wreak havoc on plumbing systems and cause expensive repairs. Grease interceptors are crucial defenders against this damage, snagging and removing FOG from wastewater before it can reach the sewer lines. But like any other piece of equipment, a grease trap needs to be regularly cleaned to maintain its efficiency.

Regular grease trap cleaning prevents clogs and foul odors. It also ensures that your restaurant or commercial food establishment complies with local FOG regulations and avoids costly fines. Keeping your commercial kitchen functioning at a high level is important to you, your clients, and your employees. Backed-up grease traps can shut down businesses for days, which means lost revenue and disgruntled clients.

A regular grease trap cleaning routine helps prevent the buildup of hardened grease, which is a leading cause of clogs. Professional cleaners use hot water and a cleaning agent to break down the grease and flush it away from the drain lines. They also scrape the walls of the grease interceptor to remove adhered debris and prevent future blockages. After completing the cleaning process, they will pump the trap and dispose of the waste in compliance with environmental regulations.

The size of a grease trap will determine how frequently it needs to be pumped. Smaller traps will need to be pumped more often than larger ones. If you’re unsure how often to clean your grease trap, contact your local municipal authority for more information.

During a grease trap cleaning, the baffles should be removed and rinsed. It’s also a good idea to install strainers in your sinks to keep large food particles and other unwanted items from entering the trap. These items can include silverware, dishrags, and gloves, which can clog the trap or cause more serious problems down the line.

It’s important to remember that even with the best of precautions, there’s no guarantee that a restaurant or commercial kitchen will completely stop unhealthy drainage. Foul odors can escape from poorly functioning drains and seep into the environment, turning customers away or making them uncomfortable. FOG can also seep into a building’s ventilation system, creating an unpleasant smell that can permeate the entire facility.

Regulations

Grease traps and grease interceptors are a critical component of food service establishment plumbing systems. Properly managing fats, oils and grease (FOG) reduces the risk of sewage system blockages and overflows, preserving water quality and protecting public health. The city of Houston enforces strict guidelines for FOG management, including regular inspection and cleaning of grease traps and interceptors. Compliance with these guidelines helps businesses avoid costly penalties and legal action while also contributing to a safer environment for future generations.

The sizing process is one of the most important considerations when installing a grease trap or interceptor. The wrong size can lead to problems, including a backup of waste and odors. An incorrectly sized trap can also cause damage to downstream piping. Grease traps and interceptors should be sized according to the number of kitchen sinks they will protect. If you’re not sure what size to get, talk with a professional or consult your local regulations.

There are several different types of grease traps and interceptors. Traditional passive systems are the most common and are available in a wide range of sizes to suit your needs. These traps work on the principal that solid food particles sink to the bottom of the tank while lighter grease and oil floats to the top. The relatively grease-free water is then fed into the septic system or sewer line.

Another option is an automatic system. These systems re-heat and skim the grease on a programmed schedule, making them more efficient than passive traps. They can be purchased in a variety of sizes to suit your facility and require less maintenance than passive systems.

Depending on your specific requirements, you may need a combination of both passive and automatic grease traps. For example, a small business may have only one passive trap connected to a larger commercial sink while a large restaurant may have multiple active and passive grease traps.

Regardless of which type of system you choose, it’s important to hire a company with experience and training in handling FOG waste. The right company will have the equipment and knowledge necessary to clean, repair and inspect your grease traps and drain lines. They will be able to identify any potential issues and provide you with options for the best course of action. In addition, the right company will keep detailed records of all maintenance activities and grease trap pumpings to prove compliance with city regulations.

Navigation